How to use GEARWRENCH Electronic Torque Wrenches with Angle

Check out this detailed video that shows you the details of how the GEARWRENCH Electronic Torque Wrench with Angle works.

To learn more about these Torque Wrenches CLICK HERE: gwtls.co/etwa

 

Introducing two new electronic torque

wrenches with angle from GEARWRENCH the

85078 3/8 inch drive with a

torque range of 10 to 100 foot pounds

and the 85079

1/2 inch drive with a torque range of 25

to 250 foot-pounds. The new torque

wrenches have three modes which makes

them invaluable to technicians. The three

modes are...Peak Torque: for applying a

specific torque load to a fastener, as

when tightening lug nuts. Angle: for

measuring angular rotation which is used

to stretch a torque to yield bolt to the

required clamping pressure as when

tightening head bolts. Peak Angle: for

applying specific torque load to a

faster and then immediately applying the

angle in one action as when tightening

connecting rod bolts. A torque wrench

with angle also allows the technician to

do standard torque jobs and anything

requiring an additional angle with one

tool. It's much quicker and more accurate

than traditional methods these torque

wrenches are exceptionally accurate for

both torque and angle requirements and

offer a choice of multiple torque scales.

Setup and use is extremely simple. First

press the power button to turn the

wrench on. The numeric display will

default to the last setting in Peak

Torque Mode. If you need to change the

setting press the set button and adjust

the torque value then press set. Now

apply torque. Rotating the wrench at a

constant steady speed until alerted to

stop by the handle vibration, audible

beep, and LCD display. The Target Torque

Alert will activate when the desired

torque level is near. When working on a

harmonic balancer or head bolts, angle

can be easily applied. Once the bolts

have been tightened to the required

torque place the wrench on a flat stable

surface. Then press the M button until an

A shows on the screen. Then press set to

start the calibration. In a moment the

wrench is calibrated. If the desired

angle is displayed the wrench is ready

to use. To achieve target angle on the bolt, turn the wrench until alerted

to stop. These electronic torque wrenches

with angle come with a GEARWRENCH

one-year limited warranty and a 90-day

calibration guarantee.